Thursday 2 May 2019

Common EDC Lab Viva Questions and Answers

Tricky ECE VIVA Questiions and Answers for Engineering students.


Common EDC Lab Viva Questions and Answers



1. What is Electronic?
The study and use of electrical devices that operate by controlling the flow of electrons or other electrically charged particles.

2. What is communication?
Communication means transferring a signal from the transmitter which passes through a medium then the output is obtained at the receiver. (or)communication says as transferring of message from one place to another place called communication.

3. Different types of communications? Explain.
Analog and digital communication.
As a technology, analog is the process of taking an audio or video signal (the human voice) and translating it into electronic pulses. Digital on the other hand is breaking the signal into a binary format where the audio or video data is represented by a series of "1"s and "0"s.
Digital signals are immune to noise, quality of transmission and reception is good, components used in digital communication can be produced with high precision and power consumption is also very less when compared with analog signals.

4. What is sampling?
The process of obtaining a set of samples from a continuous function of time x(t) is referred to as sampling.

5. State sampling theorem?
It states that, while taking the samples of a continuous signal, it has to be taken care that the sampling rate is equal to or greater than twice the cut off frequency and the minimum sampling rate is known as the Nyquist rate.

6. What is cut-off frequency?
The frequency at which the response is -3dB with respect to the maximum response.

7. What is pass band?
Passband is the range of frequencies or wavelengths that can pass through a filter without being attenuated.

8. What is stop band?
A stopband is a band of frequencies, between specified limits, in which a circuit, such as a filter or telephone circuit, does not let signals through, or the attenuation is above the required stopband attenuation level.

9. Explain RF?
Radio frequency (RF) is a frequency or rate of oscillation within the range of about 3 Hz to 300 GHz. This range corresponds to frequency of alternating current electrical signals used to produce and detect radio waves. Since most of this range is beyond the vibration rate that most mechanical systems can respond to, RF usually refers to oscillations in electrical circuits or electromagnetic radiation.

10. What is modulation? And where it is utilized?
Modulation is the process of varying some characteristic of a periodic wave with an external signals.
Radio communication superimposes this information bearing signal onto a carrier signal.
These high frequency carrier signals can be transmitted over the air easily and are capable of travelling long distances.
The characteristics (amplitude, frequency, or phase) of the carrier signal are varied in accordance with the information bearing signal.
Modulation is utilized to send an information bearing signal over long distances.

11. What is demodulation?
Demodulation is the act of removing the modulation from an analog signal to get the original baseband signal back. Demodulating is necessary because the receiver system receives a modulated signal with specific characteristics and it needs to turn it to base-band.

12. Name the modulation techniques?
For Analog modulation--AM, SSB, FM, PM and SM
Digital modulation--OOK, FSK, ASK, Psk, QAM, MSK, CPM, PPM, TCM, OFDM

13. Explain AM and FM?
AM-Amplitude modulation is a type of modulation where the amplitude of the carrier signal is varied in accordance with the information bearing signal.
FM-Frequency modulation is a type of modulation where the frequency of the carrier signal is varied in accordance with the information bearing signal.

14. Where do we use AM and FM?
AM is used for video signals for example TV. Ranges from 535 to 1705 kHz.
FM is used for audio signals for example Radio. Ranges from 88 to 108 MHz.

15. What is a base station?
Base station is a radio receiver/transmitter that serves as the hub of the local wireless network, and may also be the gateway between a wired network and the wireless network.

16. How many satellites are required to cover the earth?
3 satellites are required to cover the entire earth, which is placed at 120 degree to each other. The life span of the satellite is about 15 years.

17. What is a repeater?
A repeater is an electronic device that receives a signal and retransmits it at a higher level and/or higher power, or onto the other side of an obstruction, so that the signal can cover longer distances without degradation.

18. What is an Amplifier?
An electronic device or electrical circuit that is used to boost (amplify) the power, voltage or current of an applied signal.

19. Example for negative feedback and positive feedback?
Example for –ve feedback is ---Amplifiers And for +ve feedback is – Oscillators.

20. What is Oscillator?
An oscillator is a circuit that creates a waveform output from a direct current input. The two main types of oscillator are harmonic and relaxation. The harmonic oscillators have smooth curved waveforms, while relaxation oscillators have waveforms with sharp changes.

21. What is an Integrated Circuit?
An integrated circuit (IC), also called a microchip, is an electronic circuit etched onto a silicon chip. Their main advantages are low cost, low power, high performance, and very small size.

22. What is crosstalk?
Crosstalk is a form of interference caused by signals in nearby conductors. The most common example is hearing an unwanted conversation on the telephone. Crosstalk can also occur in radios, televisions, networking equipment, and even electric guitars.

23. What is resistor?
A resistor is a two-terminal electronic component that opposes an electric current by producing a voltage drop between its terminals in proportion to the current, that is, in accordance with Ohm's law:
V = IR.

25. What is inductor?
An inductor is a passive electrical device employed in electrical circuits for its property of inductance. An inductor can take many forms.

26. What is conductor?
A substance, body, or device that readily conducts heat, electricity, sound, etc. Copper is a good conductor of electricity.

27. What is a semi conductor?
A semiconductor is a solid material that has electrical conductivity in between that of a conductor and that of an insulator(An Insulator is a material that resists the flow of electric current. It is an object intended to support or separate electrical conductors without passing current through itself); it can vary over that wide range either permanently or dynamically.

28. What is diode?
In electronics, a diode is a two-terminal device. Diodes have two active electrodes between which the signal of interest may flow, and most are used for their unidirectional current property.

29. What is transistor?
In electronics, a transistor is a semiconductor device commonly used to amplify or switch electronic signals. The transistor is the fundamental building block of computers, and all other modern electronic devices. Some transistors are packaged individually but most are found in integrated circuits.

30. What is op-amp?
An operational amplifier, often called an op-amp , is a DC-coupled high-gain electronic voltage amplifier with differential inputs[1] and, usually, a single output. Typically the output of the op-amp is controlled either by negative feedback, which largely determines the magnitude of its output voltage gain, or by positive feedback, which facilitates regenerative gain and oscillation.

31. What is a feedback?
Feedback is a process whereby some proportion of the output signal of a system is passed (fed back) to the input. This is often used to control the dynamic behaviour of the system.

32. Advantages of negative feedback over positive feedback?
Much attention has been given by researchers to negative feedback processes, because negative feedback processes lead systems towards equilibrium states. Positive feedback reinforces a given tendency of a system and can lead a system away from equilibrium states, possibly causing quite unexpected results.

33. What is Barkhausen criteria?
Barkhausen criteria, without which you will not know which conditions, are to be satisfied for oscillations.
“Oscillations will not be sustained if, at the oscillator frequency, the magnitude of the product of the
transfer gain of the amplifier and the magnitude of the feedback factor of the feedback network ( the magnitude of the loop gain ) are less than unity”.
The condition of unity loop gain -Aβ = 1 is called the Barkhausen criterion. This condition implies that
Aβ= 1and that the phase of - Aβ is zero.

34. What is CDMA, TDMA, FDMA?
Code division multiple access (CDMA) is a channel access method utilized by various radio communication technologies. CDMA employs spread-spectrum technology and a special coding scheme (where each transmitter is assigned a code) to allow multiple users to be multiplexed over the same physical channel. By contrast, time division multiple access (TDMA) divides access by time, while frequency-division multiple access (FDMA) divides it by frequency.
An analogy to the problem of multiple access is a room (channel) in which people wish to communicate with each other. To avoid confusion, people could take turns speaking (time division), speak at different pitches (frequency division), or speak in different directions (spatial division). In CDMA, they would speak different languages. People speaking the same language can understand each other, but not other people. Similarly, in radio CDMA, each group of users is given a shared code. Many codes occupy the same channel, but only users associated with a particular code can understand each other.

35. explain different types of feedback?
Types of feedback:
Negative feedback: This tends to reduce output (but in amplifiers, stabilizes and linearizes operation). Negative feedback feeds part of a system's output, inverted, into the system's input; generally with the result that fluctuations are attenuated.
Positive feedback: This tends to increase output. Positive feedback, sometimes referred to as "cumulative causation", is a feedback loop system in which the system responds to perturbation (A perturbation means a system, is an alteration of function, induced by external or internal mechanisms) in the same direction as the perturbation. In contrast, a system that responds to the perturbation in the opposite direction is called a negative feedback system.
Bipolar feedback: which can either increase or decrease output.

36. What are the main divisions of power system?
The generating system,transmission system,and distribution system.

37. What is Instrumentation Amplifier (IA) and what are all the advantages?
An instrumentation amplifier is a differential op-amp circuit providing high input impedances with ease of gain adjustment by varying a single resistor.

38. What is meant by impedance diagram? 
The equivalent circuit of all the components of the power system are drawn and they are interconnected is called impedance diagram.

39. What is the need for load flow study?
The load flow study of a power system is essential to decide the best operation existing system and for planning the future expansion of the system. It is also essential for designing the power system.

40. What is the need for base values? 
The components of power system may operate at different voltage and power levels. It will be convenient for analysis of power system if the voltage, power, current ratings of the components of the power system is expressed with referance to a common value called base value.

27 comments:

writing essentials said...

The questions are really very important to consider when making certain judgments. Let see how it will happen.

bob said...

Thanks for this amazing article on MCQs preparation for Engineering & Top Interview Questions and Answers
was Just searching for A Guide On How To Shingle A Roof and found this amazing website of yours.

Best Assignment Help said...

1. Assignment Help
2. Assignment Helper
3. Essay Writing Help
4. Statistics Homework Help
5. Management Assignment Help
6. Nursing Assignment Help
7. Business Assignment Help
8. university assignment help
9. finance assignment help
10. business assignment help
11. english homework help
12. excel homework help
13. Python Programming Help
14. Python Programming Assignment Help
15. Python HomeWork Help
16. Python Assignment Help
17. Python Online Help
18. Help With Python Assignment
19. Help With Python Homework
20. Java Homework Help
21. Java Programming Help
22. Help with Java Programming
23. Help with Java Homework
24. Java Coding Help
25. Arduino Coding Help By Experts
26. C++ Programming Help
27. Visual Basic Assignment Help
28. ARM Assignment Help From The Experts
29. PHP Programming Help
30. spss assignment help
31. sql assignment help
32. assignment help Online
33. online assignment help
34. assignment help online
35. do my assignment
36. college assignment help
37. university assignment help
38. statistics assignment help
39. finance assignment help
40. management assignment help
41. assignment helper
42. marketing assignment help
43. programming assignment help
44. term paper help
45. accounting assignment help
46. best assignment help
47. nursing assignment help
48. economics assignment help
49. help with assignment
50. law assignment help
51. research paper help
52. assignment help service
53. computer science assignment help
54. research paper help online
55. make my assignment
56. computer science homework help
57. assignment help experts
58. homework assignment help
59. custom assignment help
60. chemistry homework help
61. assignment assistance
62. do my assignment cheap
63. business assignment help
64. assignment service
65. finance homework help
66. thesis help online
67. math assignment help
68. cheap assignment help
69. statistics homework help
70. assignment help services
71. dissertation assistance service
72. order custom assignment
73. business law assignment help
74. Do My Homework
75. college essay writing service

call tutors said...

Physics Help Online

call tutors said...

write my essay for me

Programming Assignment Help

Statistics Homework Help

statistics assignment help

Essay Writing Help

college essay writing service

essay writing help
Write My Essay

Essay Writing Experts

Essay Writing Help

Indus Design Works said...

what a great post. This is a Excellent Blog. I found your blog interesting and powerful. Keep up the good work .
Freelance structural engineering job

saketh321 said...

Very nice article. I enjoyed reading your post. very nice share. I want to twit this to my followers. Thanks !. ExcelR Business Analytics Courses

James Charlie said...

It was definitely one of the best posts you have written so far. Well done! If you are looking forward to getting the best Write My Nursing Essay of your academic journey you can get in touch with the MyAssignmentHelpAU platform at any time of the day and get your hands on expertly composed essay that can impress your professors and mentors easily.

Hindustan Univ said...

I am so happy to visit this blog and I love to read. Please stay upto date with your blogs, we will visit again to check our your new post.

Best B.Tech Aeronautical Engineering colleges in Chennai

Lazaro Coley said...

Thank you for this wonderful article. Setup should continue! My latest post is about Improve butterfly clicks. We like to visit Butterfly clicking. Thank you so much for your concern.

Studytonight said...

Hi there, thank you for sharing such great informative post with us. It is really helpful.
Code on Debian 10
Bash Shebang
Rundll32.exe
Fan Speed Controlling

Digital Skills Up said...

hi you are sharing very useful information

Tata Motors Career
what to do when bored

Phonics Edu said...

Nice Blog. Thanks for sharing very useful blog for students. It will be really helpful.

What are the different career options for btech ECE student?

Job opportunities in civil engineering after B.tech?

What are the government jobs after BTech?

What is the future scope of BSc in agriculture?

Importance of career guidance for B.Sc. Agriculture graduates

Phonics Edu said...

Nice Blog. Thanks for sharing with us. Such amazing information.

Best Bsc in Computer Science College in Roorkee

Best Bsc in Information Technology College in Roorkee

Best BCA College in Roorkee

Top BBA College in Roorkee

Best MBA College in Roorkee

Kim Jong Un said...

Thanks for sharing such a great information.. It really helpful to me..I always search to read the quality content and finally i found this in you post. keep it up!

100 Best Private Schools in Bareilly

Adeena kitchen said...

An Indian Restaurant & Takeaway in Croydon.
We serve a wide range of delicious Asian & Indian food.
We offer online ordering and table booking.
For reservation call 02036678566." www.adeenaskitchen.co.uk

Expertsminds said...

Are you struggling with your Operations Management assignment? Our Operations Management Assignment Help service is here to provide you with top-notch assistance and ensure your academic success. Our team of experienced experts understands the complexities of Operations Management and is well-equipped to tackle any problem you may encounter. Whether you need help with supply chain management, process optimization, inventory control, or any other aspect of Operations Management, we've got you covered.

Expertsminds said...

Assignment help services have been a great support system for students, providing valuable assistance in their academic journey. These services offer a lifeline to students who may be overwhelmed by the workload or struggle to grasp complex concepts. If you want Tips to Score High in Holmes T1 2023 Final Assessment. Our team consists of highly qualified and experienced tutors who specialize in various academic disciplines. They have an in-depth understanding of different subjects and can provide top-notch assistance tailored to your requirements. Don't let assignment stress consume your time and energy. Contact us today and learn more about us.

Lenny Hofsad said...

I found the section on common mistakes made in HND assignments to be particularly insightful. It's easy to overlook small errors that can have a big impact on your grade, but the HND Assignment Help guide provides clear guidance on how to avoid them.

Amelia Peterson said...

HNC course is the most difficult course, and it often takes huge time to build up a comprehensive understanding of the concepts. Preparing assessment solutions for the same is quite a tough job for most of the students. It necessitates appropriate focus and profound research work, which makes it hard to finish off the academic tasks within time by the students. Students globally look for professional help for significant assistance and HNC Assignment Help is one of the best platforms which surely bring smiles on their faces and top notch grades in their score cards!

Movie Outfits said...

The bise rawalpindi 9th result 2023. Heartbeats raced as students unfolded their scores, turning anxiety into cheers of triumph. Beyond marks, it's a proof of hard work and potential, guiding them toward exciting academic paths. Way to go!

Diana gates said...

Activity-Based Costing (ABC) is a critical tool in modern business management, and our assignment help service truly excels in guiding students through its intricate concepts. Our expert guidance provided here is invaluable for anyone striving to understand how ABC can enhance cost allocation and decision-making processes within an organization. With real-world examples and clear explanations, students can gain a deeper insight into this essential cost accounting method. Whether you're struggling to grasp the nuances of ABC or seeking to improve your skills, Our assignment help service is your ultimate destination for comprehensive and effective learning.

Amelia Peterson said...

Understanding the concepts and theories of Diploma course and then precisely finishing off academic tasks is quite an impossible job for most of the students. Almost all the students find themselves under pressure and stress whenever they have to complete the assessment tasks within a short time period. But, you need not to be worried. It is always recommended to search no more for professional help as Diploma Assignment Help is your ultimate destination!

Julian GEA said...

Bulletins are like the unsung heroes of communication, right? From workplace announcements to community happenings, they're the quick bites of info that keep us in sync. So, as you munch on your lunch, let's chat about how Bulletin bring a dash of clarity to our busy lives, one short note at a time.

Soniya Khan said...

Perfect!!! What I can say in this article is very important to be written as it may help everybody to get awareness. Good job done.
Best Medical College in Rohilkhand Bareilly region

Lenny Hofsad said...

Accessibility is another cornerstone. The Online Learning platforms have effectively demolished geographical barriers, ensuring that education is no longer confined by borders. From bustling metropolitan cities to remote rural areas, anyone with an internet connection can embark on a journey of learning and skill acquisition. You have to be read about 10 Best Online Learning Platforms That Student Must Know for Better Learning.

David said...

NOS Digital, a leading Corporate Web Design Agency, UAE, redefines online identities for businesses with innovation and expertise. Specializing in visually striking and user-centric designs, NOS Digital seamlessly integrates aesthetics with functionality. Their skilled team employs cutting-edge design principles to create impactful digital experiences. From sleek visuals to intuitive navigation, NOS Digital transforms corporate visions into captivating online realities. As a trusted partner in Dubai's competitive business landscape, they excel in delivering tailored Corporate Web Design solutions, setting new benchmarks for digital aesthetics and user engagement. NOS Digital stands out as a premier Corporate Web Design Agency, shaping compelling online brand representations for businesses in Dubai.